З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Hanging engraving machine, power 270 W, revolutions up to 20 thousand rpm. Reinforced shaft with chuck. For engraving on hard materials. Pedal control.
NOT available.
Expected price:2 480,00UAH
from 1 pc :
—
2 480,00
UAH
Prices are indicated at the time of product availability and may change upon receipt
Hanging type engraving machine is designed for processing various materials with cutters and abrasive attachments.
The shaft end is equipped with a chuck, clamped with a wrench.
Switching on and adjusting the engine speed is carried out by a pedal.
A suspension bracket is installed on the motor housing.
Shaft end housing - aluminum. Such a tip can withstand loads when engraving on stone, on various hard metals (steel, brass, bronze, cast iron). The tip is easily detached from the shaft for servicing. It is necessary to periodically remove the flexible shaft from the casing, remove the remnants of the old grease and put in a new one, this will significantly extend the shaft life, and also reduce the load on the engine.
Attention! Hang the engraving motor in such a position to avoid strong shaft bends. Bending of the shaft with a small radius leads to overloading of the motor, lowering the maximum speed, overheating and increased wear of the shaft and the motor itself.
The flexible shaft should be lubricated periodically by putting grease in the shaft outer casing.
Completeness :
outboard engine
flexible shaft with chuck
foot pedal
spare collector brushes
Features:
maximum power: 270 W
idle speed (no load), max: 20,000 rpm
supply voltage: 230 V, 50 Hz
chuck: 0.3-4 mm
weight: 2.7 kg
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
